GoLink Floor
Home
Products
Solutions
Resources
Contacts
…
Home/Engineered Wood Flooring Construction & Standard Formats
Our guide to specifying the board

Real hardwood veneer. Multilayer plywood support.

Explore GoLink engineered flooring construction, 2–6 mm veneer options, available lengths and widths, and standard herringbone and chevron configurations listed in our brochure.

01

Two material components form the engineered board

GoLink engineered flooring consists of a natural hardwood face veneer bonded to a multilayer plywood support. European oak, Russian oak, black walnut, Burmese teak and ash are the principal face species described in our brochure.

The coating protects the surface; it is not another timber core. Eucalyptus and birch plywood provide the supporting construction beneath the real hardwood face.

Illustrative engineered wood flooring material or workflow
02

Specify the veneer and plywood separately

Our brochure lists top veneers of 2, 3, 4, 5 and 6 mm, including a slice-cut 2 mm option. The standard pattern tables below identify the lamella cut and grade for each listed configuration.

The brochure also describes a 7–11-layer eucalyptus or birch plywood support of 11–15 mm. This is a described backing option, not a universal rule: the pattern tables include thinner complete boards. Record the actual veneer, plywood and total thickness together.

Material notes / illustrated

Hardwood veneer and multilayer plywood: construction schematic

Illustrative engineered board profile showing the wood face and layered core
Illustrative material study. Confirm the actual board and specification with your sample.
01
Protective coating

Specify the selected lacquer or oil system.

02
Real hardwood veneer

Brochure face-layer options: 2, 3, 4, 5 and 6 mm. Agree the species, grade and selected thickness.

03
Multilayer plywood support

Eucalyptus or birch plywood; the layer arrangement and thickness belong to the complete product specification.

Schematic only, not to scale. The brochure also describes underside cross-cutting of the plywood for underfloor-heating applications. Review the selected board and complete heating system together.

04

From sorted veneer to a bonded board

Our team hand-sorts kiln-dried oak veneers using A, B, C and D appearance grades and checks veneer thickness. Veneer and the selected plywood undergo a seven-day moisture-balancing treatment before further manufacture.

Cold pressing bonds oak veneer to plywood with Franklin REACTITE EP921 adhesive. Surface repair, sanding, profiling and coating follow as parts of the manufacturing process. The seven-day balance stage describes a process, not a complete order lead time.

05

Choose dimensions as a complete configuration

Our available dimension list extends from 450 to 2200 mm in length and from 70 to 300 mm in width. Length, width, total thickness and veneer thickness must be selected together.

Options vary with the actual requirement; the length and width lists do not offer every possible combination. The standard tables reproduce complete brochure configurations. The notation lists length × width × total thickness/veneer thickness, in millimetres; it does not assign those specifications to a named website style.

Illustrative engineered wood flooring material or workflow
06

Select the joint and pattern

GoLink offers planks, right-angle herringbone, and chevron at 45 or 60 degrees, with other angles available for custom review. Tongue-and-groove configurations can use double-grooved ends and custom splines; 2G and 5G joint systems can also be achieved.

  • Hardwood species, grade and agreed appearance range
  • Face veneer, plywood support and total board thickness
  • Length, width and any length distribution
  • Lamella cut, joint, edge detail and pattern angle
  • Coating, texture and sample reference
  • Intended use, installation requirements and product records
07

Keep specifications separate from design references

The website styles help you compare appearance. A product name, colour image or generic diagram does not identify its final dimensions, face thickness, joint or grade. Those fields are agreed for the ordered configuration.

For an installed floor, renovation depends on the remaining veneer, profile, condition and previous work. Veneer thickness alone does not establish a sanding allowance or number of future renewals.

GoLink product brochure / reference information

Available dimensions — brochure page 49

FeaturePublished options
Lengths450, 490, 510, 540, 600, 720, 900, 910, 1200, 1500, 1600, 1860, 1900 and 2200 mm
Widths70, 90, 100, 125, 148, 150, 178, 190, 200, 220, 240, 260 and 300 mm
ConfigurationOptions vary with demand; these lists do not define every length-by-width combination. The pattern configurations below are separate complete listings.

Length / width / visual rhythm

Board proportions change the visual rhythm.

AI-created straight-plank interior study illustrating board rhythm, not a measured installation
Illustrative room study. Board proportions are chosen for the actual product and layout.
490 mm900 mm1900 mm2200 mm

Four listed length options, compared proportionally. The complete dimension lists and pattern tables remain the specification reference; this diagram does not assign a size to a product.

  • Length and distributionDiscuss fixed or mixed lengths and how end joints will be distributed across the layout.
  • Width and natural characterReview the visible grain and grade in the selected board width. Wider boards do not create one universal room effect.
  • Room and laying directionCompare the room proportions, lighting, thresholds and pattern. Use a layout study rather than a rule that every small room needs short boards.
GoLink product brochure / reference information

Herringbone standard specifications — brochure page 51

FeatureLamella cutGrade
450 × 90 × 14/3 mmSawn cutABC
490 × 70 × 10/3 mmSawn cutAB
540 × 90 × 13/4 mmSawn cutABCD
600 × 90 × 10/2 mmSlice cutAB
900 × 150 × 12/3 mmSawn cutABC
910 × 125 × 14/3 mmSawn cutAB
GoLink product brochure / reference information

Chevron standard specifications — brochure page 51

FeatureLamella cutGrade
490 × 70 × 14/3 mmSawn cutCDE
510 × 90 × 10/3 mmSawn cutAB
510 × 90 × 15/4 mmSawn cutABC
540 × 70 × 14/3 mmSawn cutAB
600 × 90 × 14/3 mmSawn cutABC
620 × 90 × 11/3 mmSawn cutAB
720 × 125 × 10/3 mmSawn cutABC
770 × 125 × 15/4 mmSawn cutABCD
Design references / specification to be agreed

Explore appearance before agreeing the specification

01

European Oak Natural

Warm European oak engineered planks with lightly brushed grain and a natural-oil direction.

Explore european oak natural
02

Wide Plank Dune Oak

Soft dune oak wide-plank design reference with deep brushing and a natural-oil direction.

Explore wide plank dune oak
03

Signature Oak Private Label

Custom engineered oak flooring development for branded ranges, approved samples and coordinated packaging.

Explore signature oak private label
Continue the manufacturing brief

Connect construction to appearance and installation

01

Wood Flooring Grading & Variation Guide

GoLink sorts oak veneers by appearance and develops samples around grain, knots, sapwood, filling and colour. Use brochure grade references with an agreed sample range.

Explore wood flooring grading & variation guide
02

Wood Flooring Installation Planning for Trade Buyers

Plan installation around the selected GoLink engineered flooring. Review the substrate, joint, layout and site conditions before laying; our flooring is not for bathrooms.

Explore wood flooring installation planning for trade buyers
03

Engineered Flooring Collections, Finishes & Colour References

Explore Elements, Silence, Emerge, Create and Parquet, together with GoLink coating and texture options and 106 colour references explicitly listed in our brochure.

Explore engineered flooring collections, finishes & colour references
04

Wood Flooring Care & Maintenance Planning Guide

Prepare aftercare for the actual GoLink lacquer or oil system. Connect daily cleaning, surface protection and maintenance records to the flooring supplied.

Explore wood flooring care & maintenance planning guide
05

Wood species selection

Compare our five hardwood face species and prepare a teak colour-development or sample brief.

Explore wood species selection
Speak to the manufacturer

Define your board construction with us

Send your target species, format, proposed construction and destination requirements for manufacturing review.

Discuss a flooring specification

Frequently asked questions

Engineered construction FAQs

Understanding veneer, plywood, dimensions and standard pattern specifications.

What are the main material components in GoLink engineered flooring?

Our engineered flooring combines a natural hardwood veneer with a multi-layer eucalyptus or birch plywood support. The coating protects the surface and is specified separately. Identify the actual face, plywood construction and joint for the selected configuration rather than treating a diagram as a complete product sheet.

How do I read a size such as 450 × 90 × 14/3 mm?

The notation means 450 mm length, 90 mm width, 14 mm total board thickness and a 3 mm hardwood veneer. Total thickness and face thickness describe different measurements. The standard pattern tables list complete configurations, including lamella cut and grade, rather than independent options to mix freely.

Are all listed veneer thicknesses and board dimensions available together?

No. The brochure lists general face options from 2 to 6 mm, available lengths and widths, and specific pattern combinations. These lists do not establish every possible combination. Select the full construction and format with our team, then record the dimensions and joint in the accepted specification.

Does a thicker veneer guarantee a set number of future sanding operations?

Veneer thickness alone cannot establish that number. Renovation also depends on the remaining material, joint profile, condition of the floor and previous work. Obtain a product-specific assessment before sanding or refinishing, and retain the original construction and coating information for the person carrying out that review.

Stay in the know

Engineered flooring. OEM ideas.

Product directions and manufacturing insights for importers, distributors and flooring brands.

Preview only: no subscription is created here. Privacy policy

GoLink Floor home

China-based engineered wood flooring manufacturer since 1996, serving importers, wholesalers and flooring brands. Custom development and OEM / private-label options.

About our business

Manufactured for your market.

Company

About GoLinkManufacturingQuality controlMaterials & responsibilityPlan a factory visitCertifications & reportsOur team & responsibilities

Solutions

OEM & private labelWholesale & distributionProject supportApplicationsTrims & accessoriesIndustry solutions

Resources

Guides & downloadsHow to orderRequest samplesAfter-sales supportFAQManufacturing buying support
+86 158 5729 0101[email protected]

No. 238 Beihu Street, Wukang Town, Deqing County, Zhejiang, China

Contact our manufacturing team

AI-created imagery illustrates materials, applications and workflow. Confirm product colour and construction with an approved sample.

GoLink Floor © 2026. All rights reserved.

PrivacyTerms